peroxide cured epdm rubber technology in thailand

peroxide cured epdm | rubber technology

Peroxide cured EPDM | Rubber Technology

EPDM can be cured with sulphur and peroxide, depending on the requirements of the application. Compared with sulphur cured EPDM, peroxide cured EPDM compounds have a better chemical and thermal resistance. Where peroxide cured EPDM can resist a temperature up to 150 C (300 F), sulphur cured EPDM can only resist temperatures up to 120 C (250 F).

Send Inquiry
contact eriks - rubber technology

Contact ERIKS - Rubber Technology

Ethylene Propylene / EPM, EPDM; Peroxide cured EPDM; Peroxide cured silicone rubber; Neoprene rubber polychloroprene / CR rubber quality; Elastomer NR; Silicone rubber / VMQ; Elastomer SBR; Elastomer FPM; Fluorosilicone / FVMQ rubber quality; Thermoplastic elastomers; Fluorocarbon rubber / FKM/FPM. Fluorocarbon rubber manufacturers ...

Send Inquiry
rubber sheet - chang rubber thailand

Rubber Sheet - Chang Rubber Thailand

Cost effective – ChangRubber rubber sheet series are 100% virgin raw rubber without any recycle material, its outstanding ageing and ozone resistance makes our product last at least twice as long as normal rubber sheet in the market. This has save a lot of maintenance time and cycle time.

Send Inquiry
peroxide cured silicone rubber | rubber technology

Peroxide cured silicone rubber | Rubber Technology

Peroxide curing is the process that is required to toughen or harden rubber products by crosslinking different polymer chains. Silicone rubber is one of those polymer types. The process of peroxide curing of silicone rubber is also called vulcanization.

Send Inquiry
1,2-polybutadiene resin co-agents for peroxide cure

1,2-Polybutadiene Resin Co-Agents for Peroxide Cure

It is clear that low MW 1,2-poly (butadiene) resins are useful components of a wide range of peroxide-cured rubber compounds because they can provide non-scorch plasticizing before cure and reinforcement after cure.

Send Inquiry
thermoplastic elastomers | rubber technology

Thermoplastic elastomers | Rubber Technology

Thermoplastic elastomers (polyurethane rubber, AU, EU and other TPEs) Thermoplastic elastomers (TPEs) are a range of copolymers or a physical mix of polymers (usually a plastic and a rubber). Those based on mixed polymer systems consist of polymers with both plastic and elastic properties.

Send Inquiry
peroxide vulcanization of elastomers | request pdf

Peroxide Vulcanization of Elastomers | Request PDF

A series of compounds based on peroxide-cured ethylene-propylene-diene monomer rubber (EPDM) was prepared with varying amounts of paraffinic process oil, such as Sunpar 2280, squalane, and dodecane.

Send Inquiry
fluorocarbon rubber / fkm/fpm - rubber technology

Fluorocarbon rubber / FKM/FPM - Rubber Technology

FKM (also known as FPM in Europe) rubber compounds are frequently used to resist extreme temperatures and harsh chemicals. The strong carbon-fluorine bonds that make up the polymer structure provide high thermo-chemical resistance, giving excellent ageing characteristics, such aslow compression set at elevated temperatures.

Send Inquiry
home | rubber technology

Home | Rubber Technology

Rubber Technology ERIKS is a leading company in the field of rubber technology for practically all industries. We are your partner for supplying all possible rubber products; from more standard products like grommets and bellows to custom designed geometries and materials. For the latter we offer you a whole range of engineering and lab services.

Send Inquiry
silicone rubber / vmq | rubber technology

Silicone rubber / VMQ | Rubber Technology

Silicone can be compounded to be electrically resistant, conductive, or flame retardant. Silicones have relative high gas permeability so they cannot be used where gas-tight seals are needed. Innovative solutions for custom parts in rubber ERIKS designs and develops innovative solutions in custom moulded rubber.

Send Inquiry
peroxide cured epdm | rubber technology

Peroxide cured EPDM | Rubber Technology

EPDM can be cured with sulphur and peroxide, depending on the requirements of the application. Compared with sulphur cured EPDM, peroxide cured EPDM compounds have a better chemical and thermal resistance. Where peroxide cured EPDM can resist a temperature up to 150 C (300 F), sulphur cured EPDM can only resist temperatures up to 120 C (250 F).

Send Inquiry
peroxide or sulphur cured epdm | maclellan rubber

Peroxide or Sulphur Cured EPDM | MacLellan Rubber

Peroxide or Sulphur Cured EPDM. Other chemical agents and processes or modifications to the above have been developed to best suit the polymer type and or outcome required. In the range of ethylene-propylene (EP) rubber we have two types of product #EPR = EP copolymer and # EPDM (EthylenePropylene Die ne Monomer) = EP terpolymer- what I hear you cry...

Send Inquiry
rubber sheet - chang rubber thailand

Rubber Sheet - Chang Rubber Thailand

Cost effective – ChangRubber rubber sheet series are 100% virgin raw rubber without any recycle material, its outstanding ageing and ozone resistance makes our product last at least twice as long as normal rubber sheet in the market. This has save a lot of maintenance time and cycle time.

Send Inquiry
epdm sheet and gaskets: peroxide-cured versus sulphur

EPDM Sheet and Gaskets: Peroxide-Cured Versus Sulphur

EPDM Sheet and Gaskets: Peroxide and Sulphur Curing. Peroxide cured EPDM can withstand temperatures up to 150°C (300°F) whereas sulphur cured EPDM can only resist temperatures up to 120°C (250°F). The extended temperature service range of peroxide-cured EPDM makes it a preferred choice for producing gaskets to service higher temperature applications.

Send Inquiry
peroxide vs. sulfur cured - tnb.com

Peroxide vs. Sulfur Cured - TNB.COM

• 100% peroxide cured construction defines a rubber molding process which utilizes peroxide as a primary curing agent (not sulfur) for conductive shields and insulating layers.

Send Inquiry
“fundamentals of curing elastomers with peroxides

“Fundamentals of Curing Elastomers with Peroxides

determined by the final torque value (S). Figure 3 depicts the departure from a standard peroxide cure rheometer profile when coagents are used. Compared to a standard peroxide-only cure, the very reactive Type I coagents decrease scorch times (t 2 *) but improve cure rates (t 90 *). Type II coagents do not affect cure rate or scorch safety.

Send Inquiry
peroxide vulcanization of elastomers | request pdf

Peroxide Vulcanization of Elastomers | Request PDF

A series of compounds based on peroxide-cured ethylene-propylene-diene monomer rubber (EPDM) was prepared with varying amounts of paraffinic process oil, such as Sunpar 2280, squalane, and dodecane.

Send Inquiry
peroxide cured silicone rubber | rubber technology

Peroxide cured silicone rubber | Rubber Technology

Peroxide curing is the process that is required to toughen or harden rubber products by crosslinking different polymer chains. Silicone rubber is one of those polymer types. The process of peroxide curing of silicone rubber is also called vulcanization.

Send Inquiry